Wage determinations

How to read a Davis-Bacon wage determination

A general wage determination has a header that says where and for what work it applies, a list of rate blocks each headed by an identifier, and closing notes. Read the header first to confirm the area, the construction type and the modification in your contract. Then find the classification for the work each worker actually does and pay at least its rate plus its fringe.

Updated November 21, 2026Sources 29 CFR 1.2, 1.5, 1.6 and 5.5(a)(1); DOL Prevailing Wage Resource Book (Davis-Bacon Wage Determinations); General Decision DC20260001, Modification 6, on SAM.gov

The sample decision

This page walks through a real general wage determination: General Decision DC20260001, Modification 6, the District of Columbia decision for heavy and highway construction, as it read on SAM.gov on November 21, 2026. The excerpts are short and copied as published, typos included. Do not bid or pay from them: the rates change with each modification, and your contract names the decision and modification that bind you. Look up the current version at SAM.gov wage determinations.

Every general wage determination opens with a header. The Resource Book says it identifies the decision number, any decision it supersedes, the state, the construction type, the counties covered, any description of work included or excluded, notes on executive orders, and the record of modifications. The DC header reads:

General Decision Number: DC20260001 08/27/2026 State: District of Columbia Construction Types: Heavy and Highway Counties: District of Columbia Counties of Washington, D.C.

Decision number. DC20260001 is the state code, the year of the edition and a four-digit number. Annual editions come out in the first quarter of each year (the “rollover”), each one supersedes the prior year's decision, and the number changes to the new year. The date after the number, 08/27/2026, is the date of the current modification.

Construction type. This decision covers heavy and highway work only. A building project in Washington, D.C. would use a different decision. If your work is a different type, you are looking at the wrong document; see the four construction types. Some headers also describe work included or excluded. The Resource Book's New Hampshire example, under its building type, says the decision “does not include single family homes or apartments up to and including 4 stories”.

Area. Davis-Bacon wage determinations are issued by county. Under 29 CFR 1.6(b)(1)29 CFR 1.6Code of Federal Regulations, eCFR, a contract with work in more than one area must include the wage determination for each area, unless the agency got a multi-county project wage determination.

No expiration date. General wage determinations do not expire. Under 29 CFR 1.6(a)(2)(i)29 CFR 1.6Code of Federal Regulations, eCFR, “Once issued, a general wage determination remains valid until revised, superseded, or canceled.”

The modification record

Below the header is the list of modifications for the year's edition:

Modification Number Publication Date 3 01/23/2026 4 05/18/2026 5 07/30/2026 6 08/27/2026

“Any changes in wage rates on the GWDs are made in weekly updates, generally on Friday”, each shown as a new modification number. “Reissued wage decisions have a modification number of” 0 followed by the date of issue. The key rule: “A modification to a GWD replaces the entire GWD that it modifies.” So Modification 6 is a complete document, not a list of changes.

In modifications, an asterisk next to an item marks what that modification changed. In the copy of Modification 6 we read, no identifier carried an asterisk, so to see what changed, open the earlier version from the History tab on SAM.gov and compare.

One caution from this sample. The History tab on the same SAM.gov page listed dates that do not line up with the record printed in the document; for example, it showed Modification 3 on May 17, 2026, while the document's record says 01/23/2026. A SAM.gov notice (last updated June 22, 2026) says wage determination formatting has changed and asks users to report anything that looks published in error to BCWD-Office@dol.gov. If a date matters to your bid, ask the contracting officer to confirm it. Which modification is in your contract is its own question: see which wage determination modification applies.

Rate blocks: classification, rate, fringe

The body is a series of blocks. Each has an identifier and date, then one or more classifications with two numbers: the basic hourly rate and the hourly fringe benefit rate.

ELEC0026-001 06/02/2025 Rates Fringes ELECTRICIANS........................................$ 59.50 23.06

Read this as: an electrician on this work must get at least $59.50 an hour in basic pay plus $23.06 an hour in fringe benefits. The fringe can be paid into bona fide benefit plans, paid as extra cash, or a mix of both (40 U.S.C. 3142(d))40 U.S.C. 3142United States Code, Cornell LII; see Davis-Bacon fringe benefits.

Which line applies depends on the work, not the worker's title or skill. Under 29 CFR 5.5(a)(1)(i)29 CFR 5.5Code of Federal Regulations, eCFR, workers are paid for the classification of work actually performed, “without regard to skill” (apprentices aside). A worker who splits time between classifications may be paid each rate for the time in each, if the payroll records show the hours in each. Some descriptions carry details such as paid holidays: the DC asbestos worker line lists paid holidays. Power equipment operators come in numbered groups by equipment, and this decision has separate sets for heavy and highway work, for paving and incidental grading, and for sewer, gas and water lines. Match the work to the right set and group.

Rate identifiers

The code above each block tells you where the rate came from. The DC decision explains its own codes in its closing notes, and the Resource Book adds detail:

IdentifierExampleWhat it means
Union code (four letters, local number, internal number, date)PLUM0005-001 08/01/2025 (DC sample)A union rate prevailed. PLUM is the plumbers' union, 0005 the local, 001 an internal number; the date is the effective date of the current negotiated rate
BR or SF plus stateBRDC0001-001 04/27/2025 (DC sample)Bricklayer local numbers repeat across states, and Sprinkler Fitters Local 699 has different rates in each state, so these codes carry the state
UAVGUAVG-OH-0012 01/01/2019 (Resource Book)No single rate prevailed, but all the data were union rates; a weighted union average, updated once a year, usually in January
SUSUNH2015-005 06/16/2017 (Resource Book)A single non-union rate prevailed, or a weighted average of all survey rates (union and non-union); 2015 is the survey year
SC plus stateNone in the DC sampleA frequently conformed classification listed under 29 CFR 1.3(f)29 CFR 1.3Code of Federal Regulations, eCFR (supplemental rates)
SA plus stateSAME2023-007 01/03/2024 (DC sample notes)Rates adopted from a state or local government under 29 CFR 1.3(g)29 CFR 1.3Code of Federal Regulations, eCFR and (h)

The DC decision uses only union codes: ASBE, BOIL, BRDC, BRMD, CARP, ELEC, ENGI, IRON, LABO, MARB, PAIN, PLAS, PLUM, SHEE and TEAM. Many wage determinations mix union and SU blocks, and some are all SU. On the union average code, the DC notes say UAVG means no single rate prevailed but that “100% of the data reported for the classifications reflected union rates”. On survey rates they say: “SU wage rates typically remain in effect until a new survey is conducted.”

A union code also means one union may cover several trades. The Resource Book notes that glaziers may appear under a PAIN code and millwrights, piledrivers and divers under CARP. In the DC sample, the millwright, piledriverman and diver rates all sit under CARP codes. If you cannot find a trade alphabetically, scan the classification names under every identifier.

Why the identifier matters

The identifier is more than a label. When there is a question about which classification covers a task, DOL looks at the practice of the sector whose rate is on the wage determination. The Resource Book's compliance chapter says that if the rates for all classifications that may do the work are survey (SU) rates, the dispute is resolved by looking at non-union contractors' practice; if they are all union rates, at union contractors' practice. The same logic decides whether a conformance request is needed (see conformance). Rate dates matter too: an SU date is the survey completion date, so an old date means an old survey, and a union date is the effective date of the most recent negotiated rate WHD has posted.

The notes at the end

After the rate blocks come notes. The DC decision has several worth knowing:

Welders. “WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.” An ironworker who welds is paid the ironworker rate.

Executive Order 13658. The note says the order generally applies to contracts subject to the Davis-Bacon Act itself (not Related Acts contracts) awarded from January 1, 2015 through January 29, 2022 and not renewed or extended on or after January 30, 2022, and that such contractors must pay at least $13.65 an hour from May 11, 2026 through December 31, 2026. DOL has announced that this rate becomes $14.05 an hour on January 6, 2027 (Federal Register document 2026-20646). Older decisions also carried a note on Executive Order 14026; that order was revoked by Executive Order 14236 in March 2025, and the Resource Book says DOL is no longer enforcing it.

Executive Order 13706. The note describes paid sick leave of 1 hour per 30 hours worked, up to 56 hours a year, for contracts covered by that order.

Unlisted classifications. “Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses”, meaning the conformance clause at 29 CFR 5.5(a)(1)29 CFR 5.5Code of Federal Regulations, eCFR(iii).

Appeals. Every general decision ends with the appeals process: initial decisions from the Branch of Wage Surveys (survey matters) or the Branch of Construction Wage Determinations (other matters), then review and reconsideration by the WHD Administrator under 29 CFR 1.829 CFR 1.8Code of Federal Regulations, eCFR and part 7, then the Administrative Review Board.

A checklist for using a wage determination

  1. Get the decision number and modification number from your contract or subcontract, not from a search.
  2. Open that version on SAM.gov (use History for earlier modifications) and confirm the area and construction type match the work.
  3. If the contract has more than one wage determination, confirm which work each one covers.
  4. For each worker, match the work actually performed to a classification, and the right group or schedule within it.
  5. Pay at least the rate plus the fringe for every hour in that classification, and record hours by classification when a worker does more than one kind of work.
  6. Post the wage determination (with any conformed classifications) at the site, where workers can easily see it (29 CFR 5.5(a)(1)(i))29 CFR 5.5Code of Federal Regulations, eCFR.
  7. Enter the decision and modification numbers on each certified payroll; see the WH-347 guide.
  8. If no classification fits the work, contact the contracting officer at once about a conformance.

Questions filers ask

What do SU and UAVG mean on a wage determination?

SU marks a survey rate: a single non-union rate that prevailed, or a weighted average of all survey rates for the classification. UAVG marks a weighted average of union rates, used when no single union rate prevailed but all the data were union rates.

Do general wage determinations expire?

No. A general wage determination stays valid until it is revised, superseded or canceled (29 CFR 1.6(a)(2)(i))29 CFR 1.6Code of Federal Regulations, eCFR. Project wage determinations are different and are effective for 180 days.

Can I pay a worker the laborer rate if they are not very skilled?

No. Workers are paid for the classification of work actually performed, without regard to skill (29 CFR 5.5(a)(1)(i))29 CFR 5.5Code of Federal Regulations, eCFR. Only apprentices who meet 29 CFR 5.5(a)(4)29 CFR 5.5Code of Federal Regulations, eCFR, such as being registered in an approved program, may be paid less.

Where do I get an older modification?

On SAM.gov, open the decision and use the History tab, or include inactive wage determinations in a search. Inactive versions are for information; your contract names the one that applies.

What is the fringe column?

The hourly amount owed on top of the basic rate. It can go into bona fide benefit plans, be paid as cash, or both.