Issued by WHD; SAM.gov copies are for information. Types: standard, non-standard and section 4(c) CBA. Conform a missing job on SF-1444 within 30 days after it starts work. 29 CFR 4.5(a)(2)29 CFR 4.5Code of Federal Regulations, eCFR and 4.161; FAR 52.222-41FAR 52.222-41Federal Acquisition Regulation, acquisition.gov.
What an SCA wage determination lists
Under 41 U.S.C. 6703(1)41 U.S.C. 6703United States Code, Cornell LII and (2), every covered contract over $2,500 must state the minimum wage and the fringe benefits for each class of service employee, as DOL finds prevailing in the locality or as set in a predecessor's collective bargaining agreement (CBA). The wage determination is the attachment that does this. DOL's Resource Book describes a standard determination: a number and revision, the revision date, the locality (usually by state and county), the occupations and their hourly rates, then footnotes.
| Part of the determination | What it tells you |
|---|---|
| Wage determination number and revision | Which determination and which version you are bound by |
| Date of revision | When WHD issued it, not when it took effect in your contract |
| Locality | The states and counties it covers |
| Occupation code, title and rate | The minimum hourly wage for each class |
| Health and welfare footnote | The hourly, weekly and monthly benefit amount for all occupations |
| Vacation and holiday footnotes | Paid vacation by length of service; the named paid holidays |
| Other footnotes | Hazardous pay differentials, uniform allowance, the Directory edition, and the SF-1444 conformance note |
The fringe benefits are covered in detail on the health and welfare page, and the rest of the SCA rules in the Service Contract Act section. A Davis-Bacon determination looks different; compare it with how to read a Davis-Bacon wage determination.
Standard, non-standard and 4(c) determinations
29 CFR 4.5029 CFR 4.50Code of Federal Regulations, eCFR sets two kinds: prevailing in the locality, and CBA successorship. The Resource Book splits the first kind in two:
| Type | What it is | How it is built |
|---|---|---|
| Standard (area-wide) | Issued since 1994 for specific locations. “Each lists nearly 350 standard occupations defined in the SCA Directory of Occupations.” | Usually Bureau of Labor Statistics survey data (29 CFR 4.51)29 CFR 4.51Code of Federal Regulations, eCFR |
| Non-standard | Issued for specific contracts or types of contracts, for an area narrower or broader than a standard one | Industry-specific or other data sources |
| Section 4(c) CBA successorship | A short form naming the contract, the locality and the parties to the predecessor's CBA | The predecessor's CBA wages and fringe benefits, with accrued and prospective increases |
A contract may need several: a standard determination plus a non-standard one, a 4(c) determination for unionized classes, one per location, and sometimes a Davis-Bacon determination for construction work in the same contract.
Odd and even numbers
For each locality WHD issues two otherwise identical standard determinations that differ only in how health and welfare is met. Per the Resource Book, odd-numbered determinations require health and welfare on a fixed cost per employee basis and apply most often. Even-numbered ones use an average cost basis and, since June 1997, are issued only for successor contracts that already had the average cost rule. A 4(c) determination issued by the agency through SAM.gov carries the letters CBA in its number.
The wage and benefit amounts in the worked examples on this page are made up to show the arithmetic. Use the rates in the wage determination attached to your own contract.
How the agency gets one
Getting the determination is the contracting agency's job, not yours (29 CFR 4.4)29 CFR 4.4Code of Federal Regulations, eCFR. The agency either submits an e98 request to WHD describing the work, the location, the occupations and the federal equivalent rates, or selects a determination itself on SAM.gov. If it selects on SAM.gov, the agency is fully responsible for picking the right one, and must amend the contract within 30 days if DOL finds it wrong (29 CFR 4.5(c)(2))29 CFR 4.5Code of Federal Regulations, eCFR.
You can look up determinations on SAM.gov too, but only for information. The Resource Book says “only those wage determinations inserted into the contract at award, or by modification, are applicable”. When you price a bid, use the determination in the solicitation. If the place of performance is unknown at solicitation, the agency uses a two-step process and FAR 52.222-49FAR 52.222-49Federal Acquisition Regulation, acquisition.gov: you may bid a location without a determination, but one will be added retroactive to award with no price adjustment.
Which revision applies at award
Determinations are revised as new data comes in. 29 CFR 4.5(a)(2)29 CFR 4.5Code of Federal Regulations, eCFR sets the cut-off for a revision to bind a new contract:
| Procurement | A revision applies if the agency receives it |
|---|---|
| Sealed bids | More than 10 days before bid opening (later only if there is still reasonable time to notify bidders) |
| Negotiated, performance starts within 30 days of award | Before award |
| Negotiated, performance starts more than 30 days after award | At least 10 days before performance starts |
| Option exercise or extension | Same rules, measured from the option or extension date |
Once the contract term starts, later revisions do not change it. 29 CFR 4.16129 CFR 4.161Code of Federal Regulations, eCFR says “No change in the obligation of the contractor or subcontractor with respect to minimum monetary wages will result from the mere fact that higher or lower wage rates may be determined to be prevailing for such employees in the locality after the award and before completion of the contract.” The exception is a rise in the FLSA minimum wage, which applies on its effective date.
Multi-year contracts and options
A contract whose term is extended by option, or otherwise, is a new contract and takes the current determination (29 CFR 4.143(b))29 CFR 4.143Code of Federal Regulations, eCFR. For multi-year contracts the Resource Book sets the timing:
- Multi-year contracts subject to annual appropriations: a new determination each year, on the contract anniversary date (29 CFR 4.145(a))29 CFR 4.145Code of Federal Regulations, eCFR.
- Multi-year contracts not subject to annual appropriations: up to 5 years, with a new determination at least every 2 years, measured from the start of performance (41 U.S.C. 6707(d); 29 CFR 4.145(b))41 U.S.C. 6707United States Code, Cornell LII29 CFR 4.145Code of Federal Regulations, eCFR.
- Clause 52.222-41(c)(3): on a contract longer than 1 year, rates are adjusted after 1 year and not less often than every 2 years.
- Fact Sheet 67 lists among typical problems the failure to put in place rate increases in a new determination on a multi-year contract. When the new determination arrives, raise pay from its effective date in your contract and ask for the price adjustment under the FAR 52.222-43 clause.
Classifying your workers
Job titles in your payroll system do not decide the rate. 29 CFR 4.152(b)29 CFR 4.152Code of Federal Regulations, eCFR says “The duties which an employee actually performs govern the classification and the rate of pay to which the employee is entitled under the applicable wage determination.” The SCA Directory of Occupations (fifth edition, 2006) defines each title on a standard determination and gives each a five-digit code; levels I, II and III rise in skill and pay, and the code's last digit marks the level (General Clerk I is 01111, General Clerk II is 01112).
If one employee works in two classes in a week, keep time records by class. Otherwise “the employee must be paid the highest of such rates for all hours worked in the workweek unless it appears from the employer's records or other affirmative proof” of the split. Example. A worker spends 30 hours as a General Clerk II at $19.00 and 10 hours as a Forklift Operator at $22.00. With records, the week is 30 x $19.00 + 10 x $22.00 = $790.00. Without them, it is 40 x $22.00 = $880.00, so the missing records cost $90.00 for that one worker.
Section 4(c): the predecessor's union contract
41 U.S.C. 6707(c)41 U.S.C. 6707United States Code, Cornell LII bars a successor contractor furnishing substantially the same services from paying a service employee less than the wages and fringe benefits, including accrued benefits and prospective increases, that the predecessor's CBA provided. The duty is self-executing: it applies even if the agency left the CBA out of your determination (FAR 22.1002-3)FAR 22.1002-3Federal Acquisition Regulation, acquisition.gov. It does not depend on who you hire. The Resource Book says “even if a successor contractor does not hire any of the predecessor contractor's employees, the successor contractor is nevertheless required to pay service employees employed on the contract the CBA rates established in the predecessor contractor's CBA”.
The duty is limited to pay and benefits. It “does not extend to other items such as seniority, grievance procedures, work rules, overtime, etc.” Other limits:
- Timing. If the contracting officer gave the incumbent and the union at least 30 days' written notice of the procurement dates, a new or changed CBA counts only if the agency receives it in time: for sealed bids, 10 days before bid opening; for negotiated awards, before award if performance starts within 30 days, otherwise 10 days before performance starts (29 CFR 4.1b(b); FAR 22.1010 and 22.1012-2)29 CFR 4.1bCode of Federal Regulations, eCFRFAR 22.1010Federal Acquisition Regulation, acquisition.govFAR 22.1012-2Federal Acquisition Regulation, acquisition.gov.
- Substantial variance. DOL may, after a hearing, find the CBA rates substantially at variance with locally prevailing rates.
- Arm's length. The CBA terms do not apply if DOL finds they were not reached through arm's length negotiations.
- Deadlines for a hearing request: for sealed bid contracts, more than 10 days before award; for negotiated contracts and option periods, before the start date (FAR 22.1021(d))FAR 22.1021Federal Acquisition Regulation, acquisition.gov.
Conforming a missing job
If you need a class of worker whose duties no listed class covers, you must propose a title and rate through conformance. FAR 52.222-41(c)(2)FAR 52.222-41Federal Acquisition Regulation, acquisition.gov(ii) says “The Contractor shall submit Standard Form (SF) 1444, Request For Authorization of Additional Classification and Rate, to the Contracting Officer no later than 30 days after the unlisted class of employee performs any contract work.” The contracting officer adds a recommendation and the employees' agreement or disagreement and sends it to WHD, which acts within 30 days or says it needs more time. The approved rate is owed from the first day the class worked.
The rate must bear a reasonable relationship to listed classes of similar skill; the Directory's federal grade equivalencies can help. The Resource Book's limits: a class can be conformed only if no listed class covers the work; helpers, trainees and levels below the lowest listed level cannot be conformed; and “A conformance may not be used to artificially split or subdivide classifications listed in wage determinations.” The fringe benefits are those already on the determination. On an option or successor contract you may index a previously conformed rate by the average percentage change in the listed rates you use, and tell the contracting officer. See Davis-Bacon conformance for the construction version.
Minimum wage floors
No SCA rate can be below the FLSA minimum wage (41 U.S.C. 6703(1))41 U.S.C. 6703United States Code, Cornell LII. Executive Order 14026 (signed by President Biden on April 27, 2021), which set a higher contractor minimum wage, was revoked by President Trump in Executive Order 14236 on March 14, 2025, and DOL's page says “the Department of Labor is no longer enforcing Executive Order 14026”. Executive Order 13658 (signed by President Obama on February 12, 2014) still applies to certain SCA and Davis-Bacon contracts awarded from January 1, 2015 to January 29, 2022 and not renewed or extended on or after January 30, 2022. Its rate is $13.65 an hour from May 11, 2026, and DOL's notice says it “will increase to $14.05 per hour” on January 6, 2027 ($9.85 cash wage for tipped employees).
The determination rules are in 29 CFR 4.5 and part 4; DOL explains them in the Resource Book chapter on SCA wage determinations and conformance.
Questions filers ask
Where do I find the SCA wage determination for my contract?
In your contract or solicitation. SAM.gov has public copies for information, but only the determination incorporated in your contract at award or by modification binds you.
A newer revision was posted after award. Do I have to pay it?
Not until it is incorporated, usually at the next option, extension or anniversary. A rise in the FLSA minimum wage is the exception.
What is the difference between odd and even numbered determinations?
Odd numbers require health and welfare per employee at a fixed cost. Even numbers use an average cost and are issued only for successors to contracts that already had it.
Do I have to pay the old contractor's union rates if I bring my own staff?
Yes, if section 4(c) applies. The successor owes the predecessor's CBA wages and benefits whether or not it hires the predecessor's employees.
What if a job I need is not on the determination?
Submit an SF-1444 conformance request through the contracting officer within 30 days after the class starts work, and pay the approved rate back to the first day.
Can I pay a trainee less than the level I rate?
No. Trainee classes and levels below the lowest listed level cannot be conformed. Registered apprentices are the exception, under the clause's apprentice rules.