Template

Weekly certified payroll review checklist

Use this checklist each week to review a certified payroll before you accept it and pass it on. It follows the contract clauses in 29 CFR 5.5, the Copeland Act rules in 29 CFR part 3 and the WH-347 instructions. Print one per payroll, or keep it as a standing review routine.

Updated November 21, 2026Sources 29 CFR 5.5(a)(1), (a)(3) and (a)(4); 29 CFR 3.4 and 3.5; WH-347 instructions; DOL Prevailing Wage Resource Book
At a glance
Due
Within 7 days after the regular pay date
Who answers
The prime, for all subcontractor payrolls
Boxes
1, 2, 3 and 6 always checked on WH-347
Keep
3 years after the prime contract work is done

When to use it

A certified payroll is checked twice: once by the prime, who must collect it from every sub, and again by the agency or owner that receives it. The clause in 29 CFR 5.5(a)(3)(ii)(A) is plain: “The prime contractor is responsible for the submission of all certified payrolls by all subcontractors.” Under 29 CFR 3.4(a), each payroll must be delivered “within 7 days after the regular payment date of the payroll period”. A review that waits until the end of the job finds problems after the money is gone.

The checklist suits a prime's payroll clerk, an owner's compliance reviewer or an agency labor compliance officer. For the form itself, see the WH-347 guide, and for the usual mistakes, common certified payroll errors. This template is a general starting point, not legal advice. Adapt it to your contract, your wage determination and any state law that also applies, and have counsel review it where the stakes are high.

The checklist

Download .docxHighlighted text is what you replace.

Template from prevailingwagerules.com, based on 29 CFR 5.5(a)(1), (a)(3) and (a)(4); 29 CFR 3.4 and 3.5; WH-347 instructions; DOL Prevailing Wage Resource Book. Replace the highlighted text, check every line against your plan's facts, and delete this note before you use it.

Weekly Certified Payroll Review Checklist

Project: [Project name]
Contract no.: [Contract or project number]
Contractor or subcontractor: [Legal business name]
Payroll no.: [Number] Week ending: [Date] Final payroll: [Yes or No]
Reviewed by: [Name] on [Date]

1. Timing and completeness

☐ Regular pay date for this week: [Date]. Received on: [Date]. Within 7 days after the pay date: [Yes or No]

☐ Payroll numbers run in order with no gap since the last one received: [Last number received]

☐ Every contractor and subcontractor that worked this week has sent a payroll: [Missing firms, or None]

☐ Business name is the firm's legal name and matches the subcontract.

2. Wage determination and classifications

☐ Wage determination number(s) and modification(s) on the payroll match the contract: [WD and mod]

☐ Every classification listed appears on the wage determination.

☐ Classifications match the work seen on site or in the daily logs: [Differences, or None]

☐ A worker in more than one classification has a separate row for each, with hours split.

☐ No classification is missing from the wage determination. If one is, the contracting officer has been told: [Date]

3. Hours, rates and overtime

☐ Hourly rate paid (column 6A) for each classification is at least the base rate on the wage determination.

☐ Fringe credit (column 6B), cash in lieu (column 6C), or both, together cover the fringe rate for every hour worked.

☐ Cash in lieu of fringes is not mixed into the hourly rate in column 6A.

☐ If CWHSSA applies, hours over 40 in the week are paid at not less than one and one-half times the basic rate.

☐ Daily hours add up to the weekly total in column 5.

☐ Gross for this project (7A) and gross for all work (7B) are both filled in.

4. Apprentices

☐ Each worker marked RA is individually registered, with the program and level of progression shown.

☐ Statement of Compliance box 4 is checked and lists each program and its registration agency.

☐ Apprentice rate matches the program's percentage of the journeyworker rate.

☐ Apprentice fringes are paid as the program states, or at the full wage determination fringe if the program is silent.

☐ The apprentice-to-journeyworker ratio was met each day. Apprentices over the ratio are paid the full rate.

5. Deductions

☐ Tax and FICA withholdings shown.

☐ Every "Other" deduction is described in Additional Remarks or itemized in an addendum.

☐ Each deduction is one the Copeland Act rules allow without DOL approval, or has DOL approval: [Questioned deductions, or None]

6. Statement of Compliance

☐ Boxes 1, 2, 3 and 6 are checked.

☐ Box 5 is checked and the Hourly Credit for Fringe Benefits table is filled in if the firm takes a plan credit.

☐ Signed by the contractor or the agent who pays or supervises payment, with a handwritten or legally valid electronic signature.

☐ Signer's name, title, phone, email and date are filled in.

7. Privacy

☐ Workers are shown by an identifying number only (for example the last four digits of the SSN). No full SSNs, home addresses, phone numbers or emails on the transmittal.

8. Follow-up

• Problems found: [Describe]

• Sent back to the firm on: [Date]

• Corrected payroll received on: [Date]

• Back wages paid, if any: [Amount, workers, date]

• Reported to the contracting or funding agency on: [Date, or Not needed]

The rules behind each section

Section 2, classifications. Pay follows the work, not the worker's title. Under 29 CFR 5.5(a)(1)(i), workers “must be paid the appropriate wage rate and fringe benefits on the wage determination for the classification(s) of work actually performed, without regard to skill”. Split rates are allowed only when the records show the time in each classification. If a trade is missing, the WH-347 instructions say to contact the contracting officer or agency representative right away; see conformance.

Section 3, rates and fringes. Column 6A carries only the cash hourly rate. The instructions warn: “Note: do not include cash payments in lieu of fringe benefits in this column.” Fringe credit goes in 6B and cash in lieu in 6C. Where CWHSSA applies (contracts over $100,000), 29 CFR 5.5(b)(1) requires pay “at a rate not less than one and one-half times the basic rate of pay for all hours worked in excess of forty hours in such workweek”. See Davis-Bacon overtime and fringe benefits.

Section 4, apprentices. Only registered apprentices may be paid less, and only within the ratio. 29 CFR 5.5(a)(4)(i)(C) says “any apprentice performing work on the job site in excess of the ratio permitted under this section must be paid not less than the applicable wage rate on the wage determination for the work actually performed”. The apprentice ratio checker helps with the daily count.

Section 5, deductions. 29 CFR 3.5 lists deductions allowed without DOL approval, starting with “Any deduction made in compliance with the requirements of Federal, State, or local law”, and including certain voluntary plan contributions, credit union payments and union dues under a collective bargaining agreement. Anything else needs a closer look; see permitted deductions.

Section 6, the Statement of Compliance. The WH-347 instructions say “Boxes 1, 2, 3 and 6 (i.e., the first three boxes and the last box) always must be checked”. Box 4 is for apprentices and box 5 for a fringe plan credit. The signature must be “an original handwritten signature or a legally valid electronic signature”, and the instructions add that the signer should know the facts are true. The Resource Book says a photocopied, faxed or scanned statement emailed to an agency does not meet the signature rule (DOL compliance principles).

Section 7, privacy. 29 CFR 5.5(a)(3)(ii)(B) says “full Social Security numbers and last known addresses, telephone numbers, and email addresses must not be included on weekly transmittals”. Send back any payroll that carries them.

Section 8, follow-up. For agencies, 29 CFR 3.4(a) adds that “The certified payrolls must also be transmitted together with a report of any violation”. Keep the reviewed payrolls and your notes for 3 years after all the work on the prime contract is completed. See certified payroll records.

Questions filers ask

How fast must a certified payroll reach the agency?

Within 7 days after the regular payment date of the payroll period, under 29 CFR 3.4(a). A prime usually sets an earlier internal date for its subs so it can review them in time.

Is a payroll on our own format acceptable?

Yes. WH-347 is optional. Any format works if it carries all the required information and a Statement of Compliance with identical wording.

Can a scanned signature be accepted?

DOL's Resource Book says photocopied, faxed or scanned Statements of Compliance emailed to an agency do not meet the signature rule. A handwritten original or a legally valid electronic signature does.

What if a payroll shows a full Social Security number?

Return it. The weekly transmittal may carry only an identifying number, such as the last four digits. The full number is kept in the contractor's records and given on request.

Must we review every subcontractor's payroll?

The prime is responsible for submitting all subcontractor payrolls and for the subs' compliance, so a weekly review of each one is the practical way to meet that duty.