Programs are registered with DOL's Office of Apprenticeship or a recognized State Apprenticeship Agency. The ratio is checked daily, using the project locality's ratio. 29 CFR 5.229 CFR 5.2Code of Federal Regulations, eCFR and 5.5(a)(4); DOL Fact Sheet 66E.
Who counts as an apprentice
29 CFR 5.229 CFR 5.2Code of Federal Regulations, eCFR defines an apprentice as “A person employed and individually registered in a bona fide apprenticeship program registered with the U.S. Department of Labor, Employment and Training Administration, Office of Apprenticeship, or with a State Apprenticeship Agency recognized by the Office of Apprenticeship”. The definition also covers a person in the first 90 days of probationary employment who is not yet individually registered but has been certified by the Office of Apprenticeship (OA) or the State Apprenticeship Agency (SAA) as eligible.
Both steps matter: the program must be registered and the person must be registered in it. A worker in an unregistered company training program, or a registered program the worker never joined, is not an apprentice for Davis-Bacon pay. DOL's Resource Book notes that apprentices are laborers and mechanics, but wage determinations do not list them. Their rate is built from the journeyworker rate for the work they do. For who else counts as a laborer or mechanic, see laborers and mechanics.
The wage rates in the examples on this page are made up to show the arithmetic. Use the rates and fringe amounts on the wage determination in your own contract.
Wage progression and fringe benefits
Each apprentice is paid the percentage the registered program sets for the apprentice's level, “calculated as a percent of the basic hourly rate required by the applicable wage determination for the applicable classification”. Use the classification of the work the apprentice actually performs.
Fringe benefits follow the program too. Under 29 CFR 5.5(a)(4)(i)(B)29 CFR 5.5Code of Federal Regulations, eCFR, apprentices get fringe benefits as the program provides. “If the apprenticeship program does not specify fringe benefits, apprentices must be paid the full amount of fringe benefits listed on the wage determination for the applicable classification.” Fact Sheet 66E adds that program fringe terms apply only when apprentices are employed within the program's ratio and other terms.
Example. The electrician rate is $35.00 basic plus $15.00 fringe. A second-year apprentice's program sets pay at 60 percent.
| Item | Program silent on fringe | Program sets apprentice fringe at $9.00 |
|---|---|---|
| Cash rate | 60% x $35.00 = $21.00 | 60% x $35.00 = $21.00 |
| Fringe per hour | $15.00 (full journeyworker amount) | $9.00 |
| Total per hour | $36.00 | $30.00 |
| 40-hour week | 40 x $36.00 = $1,440.00 | 40 x $30.00 = $1,200.00 |
Ratios are checked every day
29 CFR 5.5(a)(4)(i)(C)29 CFR 5.5Code of Federal Regulations, eCFR caps apprentices on the job site in each craft at the ratio the registered program allows for your whole workforce, or the ratio for the project's locality. The Resource Book is specific about timing: “Compliance with the applicable ratio is determined on a daily, not weekly basis.” Partial supervision does not count unless the program allows it. A journeyworker who splits a day between two apprentices supervises each for only half a day.
When you go over the ratio, “only the individuals who were working before the applicable ratio was exceeded may be paid less than the wage determination rate(s) for the work performed”. The rest are owed the full rate for that day.
Example. The program ratio is one apprentice to one journeyworker. On Tuesday, two journeyworker electricians and three apprentices work 8 hours on site. Apprentices A and B, who started first, may be paid the apprentice rate. Apprentice C is over the ratio and is owed the electrician rate: 8 x $50.00 = $400.00, not 8 x $36.00 = $288.00. The underpayment if C is paid as an apprentice is $112.00 for that day.
Working outside your program's area
Apprenticeship programs generally do not travel with you. Under 29 CFR 5.5(a)(4)(i)(D)29 CFR 5.5Code of Federal Regulations, eCFR, on a project outside the locality where your program is registered, you follow the ratios and wage percentages that apply where the work is done. Only if the project's locality has no applicable ratio or wage rate do you use your own program's. DOL's 2023 rule FAQ says this applies “whether multiple apprenticeship programs are registered in the same state or the contractor or subcontractor performs work in a locality other than the one in which its program is registered”.
When the reduced rate is lost
The apprentice rate disappears in these cases, and the full wage determination rate for the work performed is owed:
- The worker is not individually registered (and is not a certified probationer in the first 90 days). The rule says “Any worker listed on a payroll at an apprentice wage rate, who is not registered or otherwise employed as stated in paragraph (a)(4)(i)(A) of this section, must be paid not less than the applicable wage rate on the wage determination for the classification of work actually performed.”
- The apprentice is over the daily ratio.
- The OA or SAA withdraws approval of the program: then “the contractor will no longer be permitted to use apprentices at less than the applicable predetermined rate for the work performed until an acceptable program is approved”.
Apprentice errors produce back wages that DOL can withhold from contract payments; see withholding and debarment.
Apprenticeship costs as fringe credit
What you spend on a registered apprenticeship program (instruction, books, tools or materials) can be credited toward the fringe obligation under 29 CFR 5.29(g)29 CFR 5.29Code of Federal Regulations, eCFR, but only for the classification trained, annualized over that classification's hours. A $6,000 yearly cost for carpenter apprentices, divided by 12,000 hours worked by your carpenters and carpenter apprentices on all projects, is $0.50 an hour, creditable only against carpenters' and carpenter apprentices' fringe. The details are on the fringe benefits page.
Helpers
Helpers are laborers or mechanics, and they are paid by the wage determination like anyone else. 29 CFR 5.229 CFR 5.2Code of Federal Regulations, eCFR allows a distinct helper classification on a wage determination only where “The duties of the helper are clearly defined and distinct from those of any other classification on the wage determination”, the use of helpers is an established prevailing practice in the area, and the helper is not a trainee in an informal training program.
If the wage determination has no helper classification, a helper doing a craft's work is paid that craft's rate. 29 CFR 5.5(a)(1)(i)29 CFR 5.5Code of Federal Regulations, eCFR requires pay for the classification of work actually performed, “without regard to skill, except as provided in paragraph (a)(4)”, and only registered apprentices fall under (a)(4). A helper rate can be added through conformance, which covers any class of workers including helpers, not listed in the wage determination, but only if the helper's work is not done by a classification already listed. See conformance.
Trainees
The 2023 rule removed the old trainee category from parts 1 and 5 because, as DOL explained, “ETA no longer reviews or approves on-the-job training programs”. A trainee who is not a registered apprentice is paid the full rate. One exception remains for Federal-aid highway work: the prevailing wage rule “shall not be applicable to employment pursuant to apprenticeship and skill training programs which have been certified by the Secretary of Transportation”, and 29 CFR 5.229 CFR 5.2Code of Federal Regulations, eCFR says the apprentice rules do not apply to those trainees. See the 2023 rule.
Records and the WH-347
Keep written evidence of the program's registration, each apprentice's registration, and the program's ratios and wage rates (29 CFR 5.5(a)(3)(i)(D))29 CFR 5.5Code of Federal Regulations, eCFR. On the WH-347, column 2 shows "RA" and the level of progression for each registered apprentice, and box 4 of the Statement of Compliance lists each program, whether it is registered with the OA or an SAA, and the classification.
Apprentices on clean energy projects
The IRS apprenticeship rules for the clean energy credits are a separate test with their own regulations. Treas. Reg. 1.45-8Treas. Reg. 1.45-8Treasury regulations, eCFR sets a labor hours requirement, a ratio requirement and a participation requirement. See the clean energy section.
Questions filers ask
Can I pay an apprentice who is not registered yet?
Only at the full journeyworker rate, unless the person is in the first 90 days of probationary employment and the OA or SAA has certified them eligible.
Is the ratio checked weekly or daily?
Daily. If you exceed the ratio on any day, the apprentices beyond the ratio that day are owed the full rate for their hours.
My program is registered in another state. Which ratio applies?
The ratio and wage percentages that apply where the project is. Your own program's terms apply only if the project's locality has none.
Do apprentices get fringe benefits?
Yes, as the registered program provides. If the program is silent, they get the full fringe amount on the wage determination for the classification.
Can I pay a helper less than the journeyworker rate?
Only if the wage determination lists a helper classification or one was added by conformance. Otherwise the helper is paid the rate for the work performed.
What happened to trainees?
The 2023 rule removed the trainee provisions. Only trainees in programs certified by the Secretary of Transportation on Federal-aid highway projects keep a separate status.