Agency: Delaware DOL, Office of Construction Enforcement. Custom fabrication is covered wherever it is done. Law: 29 Del. C. 6960, as of November 2026.
At a glance
Delaware's law sits in the state procurement code, 29 Del. C. 6960, with a craft training rule next to it in 6960A. The Office of Construction Enforcement in the DOL Division of Industrial Affairs runs both the prevailing wage program and contractor registration. Its page says the office will help you “Get step-by-step help with contractor registration, certified payroll, worker classification, and prevailing wage for public projects.” The facts below come from the Delaware Code Online and the office's page, read on November 21, 2026.
| Item | Delaware rule | Where it comes from |
|---|---|---|
| Who must pay | Employers on State or subdivision public works where the State appropriated any part of the funds | 6960(a) |
| Threshold | Over $500,000 new construction; over $45,000 alteration, repair, renovation, rehabilitation, demolition or reconstruction (as of November 2026) | 6960(a) |
| Rates | By county and craft: union rates that prevailed 4 years in a row, otherwise DOL's survey | 6960(a) |
| Pay frequency | At least once a week | 6960(b) |
| Payroll | Sworn payroll furnished weekly; DOL keeps it 6 months | 6960(c) |
| Civil penalty | $1,000 to $5,000 per violation | 6960(e) |
| Worker claims | Treble the underpayment, plus attorney's fees | 6960(f) |
Which projects are covered
Section 6960(a) covers the specifications for every contract, or aggregate of contracts, on “a public works project in excess of $500,000 for new construction (including painting and decorating) or $45,000 for alteration, repair, renovation, rehabilitation, demolition or reconstruction” (including painting and decorating of buildings or works), to which the State or a subdivision is a party and “for which the State appropriated any part of the funds”, and that employs mechanics or laborers.
Three points matter when you price the job:
- The dollar test uses the aggregate of contracts, so splitting the work into smaller contracts does not get under the line.
- Any State appropriation counts. A county or town job is covered if the State put money into it.
- Two funding sources are carved out: Department of Transportation projects wholly funded by Community Transportation Funds, and projects wholly funded by the Municipal Street Aid Program (6960(m)).
Coverage also follows certain off-site work. The required contract clause covers mechanics and laborers employed directly upon the site of the work “or engaged in any custom fabrication work, regardless of where the work is performed” (6960(b)). That is broader than the federal site-of-the-work rule; see our off-site fabrication by state page.
Rates
The DOL Division of Industrial Affairs sets the rate for each craft or class in each county. Since January 1, 2016, the statute ties the rate to collective bargaining where a union rate has been prevailing: a craft's collective bargaining rate becomes the prevailing wage in a county if that rate prevailed, and the union took part in the survey, for 4 consecutive years. Where union rates do not apply, the statute says the prevailing wage is the highest rate of the 4 years, and where no rate can be set that way DOL uses its annual prevailing wage survey (6960(a)).
| Kind of rate | How it changes each year |
|---|---|
| Collective bargaining rate adopted for the craft and county | Follows the agreement rate for that craft and county each year |
| Non-union rate | Adjusted by the Consumer Price Index-Construction |
| No rate can be set from agreements | DOL's annual prevailing wage survey |
For non-union rates the statute is direct: “When collective bargaining rates do not prevail, the annual rate adjustment shall be the Consumer Price Index-Construction.” Each rate can be challenged once per cycle under DOL regulations. The Office of Construction Enforcement posts Building, Heavy and Highway rate schedules and a Certified Prevailing Wage Rates Request Form for confirming the rates on a specific project.
The contract must require you to pay workers unconditionally and at least once a week, with no later deduction or rebate, at not less than the rates in the specifications, whatever the contract between you and the worker says. You must post the wage scale in a prominent place at the site, and DOL may withhold enough of your payments to cover any underpayment (6960(b)).
Certified payroll
Section 6960(c) requires a contract term that “sworn payroll information, as required by the Department of Labor, be furnished weekly”. DOL keeps the sworn payroll for 6 months from the last day of the week it covers. The Office of Construction Enforcement provides a fillable Certified Payroll Report Form; the page says “Use this form to submit your certified payroll for public works projects” and describes it as a tool for weekly payroll submissions. The pages we read describe no online filing portal beyond the form (as of November 2026).
Failing to submit payroll reports is itself a violation that carries the $1,000 to $5,000 civil penalty in 6960(e), the same as underpaying. For how Delaware compares, see certified payroll by state and the certified payroll due date tool.
Registration, fees and training
Delaware has a contractor registration law that reaches beyond public works. The Office of Construction Enforcement page says “Registration is required before performing any construction or maintenance work in the state.” You apply through the state's OneStop portal and get a Contractor Registration Certificate, and the page tells registered contractors to renew before the certificate expires at 11 months. The pages we read do not state a registration fee (as of November 2026).
The page lists consequences for breaking Delaware's construction laws: penalties of $1,000 to $85,000 per violation, revocation, suspension or denial of registration, and required surety bonds after violations. It also points to the Workplace Fraud Act on worker misclassification and a Notice of Independent Contractor or Exempt Status form. If you hire subcontractors, check each one against the state's registered contractor search before it starts.
Apprentices
Section 6960A adds a craft training rule. A contract on a public works project under 6962 must include a craft training program for each craft when the project meets the prevailing wage requirement, the contractor has 10 or more employees, the project is not a federal highway project (with one listed exception), and the craft has an apprenticeship program on the state list. The contractor must also commit that its subcontractors provide craft training if the rule applies to them.
| Way to meet the requirement | Detail |
|---|---|
| Active apprentice | At least 1 active apprentice in a craft training program for the craft (need not work on this contract) |
| Recent completion | An apprentice who completed the program within 6 months before the contract was signed |
| Consortium | Membership in a consortium with a regular financial contribution and at least 1 active apprentice |
| Payment | A payment into DOL's Apprenticeship and Training Fund; yearly totals of $10,000 (10 to 25 employees) or $20,000 (over 25) cover all contracts that year |
The yearly cap for larger firms reads: “For employers with more than 25 employees, payments that total $20,000.” The contract must carry a penalty for non-compliance: the fund payment plus up to 10% more, which the agency may remit if you prove compliance within 60 days. These amounts are as of November 2026. For the federal rules, see Davis-Bacon apprentices.
Penalties, debarment and worker claims
DOL investigates every claim of underpayment. If it finds one, it notifies the employer by certified mail, and if the employer does not comply within 15 days of receipt, the Secretary may terminate the employer's right to proceed with the work, with the employer liable for the damages (6960(d)).
| Violation | Consequence | Section |
|---|---|---|
| Knowingly underpaying, not submitting payroll reports or not posting rates | Civil penalty of $1,000 to $5,000 for each violation | 6960(e) |
| A second violation within 2 years after a judgment | No public contract for 3 years from the later penalty judgment | 6960(e) |
| Underpaying a worker | Treble the difference, attorney's fees and costs | 6960(f) |
| Contract manager that knowingly fails to monitor compliance | $100 to $500 per failure | 6960(j) |
| Retaliating against a worker who complained | $1,000 to $5,000 for each violation | 6960(k) |
The core penalty clause makes an employer “subject to a civil penalty of not less than $1,000 nor more than $5,000 for each violation”. Workers, or DOL on their behalf, can sue “to recover treble the difference between the amount so paid and the prevailing wage rate”. “It shall not be a defense to such action that the underpayment was received by the laborer or mechanic without protest.” The employer must post a bond once suit is filed. Suits must be brought within 2 years (6960(h)).
Liability runs up the chain. A person who contracts out work it undertook becomes civilly liable to the sub's employees for unpaid prevailing wages (not the treble damages) when the sub fails to pay, and can recover from the sub (6960(i)). The office posts a Prevailing Wage Debarment List.
Recent changes
We found no dated 2024 to 2026 change we could confirm from the saved sources. The history line under 6960 lists amendments by 84 Del. Laws c. 42, c. 124 and c. 466, the most recent session laws shown, but the Delaware Code page does not say which wording each one added or when it took effect, so we do not describe them here. The payment option in 6960A(c) applies to contracts executed after September 9, 2022. Check the Office of Construction Enforcement page for current rate schedules before you bid, and see the state law changes log.
State law and Davis-Bacon on the same job
Section 6960 does not address federal Davis-Bacon rates, and the Office of Construction Enforcement page we read does not either. The only federal reference we found is the craft training carve-out for federal highway projects in 6960A(a)(1). If the project has federal money and State money, read Davis-Bacon coverage and which prevailing wage rules apply, and ask the Office of Construction Enforcement and the federal funding agency how rates and payrolls will be handled.
Questions filers ask
What is the Delaware prevailing wage threshold?
Over $500,000 for new construction, or over $45,000 for alteration, repair, renovation, rehabilitation, demolition or reconstruction, counting the aggregate of contracts, when the State funded any part (as of November 2026).
How often do I submit certified payroll in Delaware?
Weekly. Section 6960(c) requires sworn payroll information, as DOL requires, to be furnished every week, and DOL provides a fillable Certified Payroll Report Form.
Is shop fabrication covered by Delaware prevailing wage?
Custom fabrication work is covered regardless of where it is performed, under the contract clause in 6960(b).
How are Delaware rates set?
By county and craft. A union rate that prevailed for 4 consecutive years becomes the rate and moves with the agreement; other rates move with the Consumer Price Index-Construction or come from DOL's annual survey.
Can a worker sue for unpaid prevailing wages in Delaware?
Yes. A worker, or DOL for the worker, can recover three times the underpayment plus attorney's fees and costs. The suit must be filed within 2 years.
Do I need to register as a contractor in Delaware?
Yes. The Office of Construction Enforcement says registration is required before performing any construction or maintenance work in the state.